12

2016-09

Brief introduction and application of oven / drying box

Before the emergence of drying box technology, the ancients mainly through the way of drying clothes and other items in the fire in order to achieve drying, keep a certain temperature; the emergence of drying box, greatly simplified the drying of the environment and conditions required, but also greatly simplified the operation method, more and mor [more]

12

2016-09

Choosing a quality guaranteed drying oven is the best protection for t

All kinds of drying equipment are precision instruments or high-tech products, so in the process of moisture-proof or sterilization, choose a quality-assured drying box to help special needs, on the contrary, if the choice is not good, sometimes it will cause certain damage to the equipment. In the general laboratory, there will be a lot of need fo [more]

15

2016-08

The difference between the oven and the oven is introduced.

It is totally wrong to confuse ovens with ovens. There are many kinds of ovens, but there are relatively few kinds of ovens. In addition, ovens are used more in industry, while ovens are mainly used for food baking in daily family life. There are essential differences between the two.Oven is a kind of sealed electrical appliances for baking food or [more]

15

2016-08

Analysis of test center oven / drying box usage management regulations

In order to strengthen the use and management of laboratory ovens, improve the use efficiency of ovens/ovens, maintain normal inspection and scientific research order, and create a safe and harmonious working atmosphere, these Regulations are formulated in accordance with the relevant spirit of the company's safety culture construction and the [more]

15

2016-08

Safe operation regulation for oven / drying box

1. purposesIn order to ensure the safety of laboratory analysts, this operation procedure is formulated.2. oven rangeThis regulation applies to the safety technical operation of laboratory analysts.3. definition or classificationnothing4. duties4.1 laboratory analysts must comply with this regulation.4.2 safety and health department and power plant [more]

15

2016-08

Teach you how to choose oven / drying box.

The selection of oven/drying oven is very important and plays an important role in the actual production test process. Different materials have different requirements for different ovens. In order to meet the drying requirements of actual production tests, we need to understand the classification of ovens / drying boxes. The following are some type [more]

24

2016-06

What about vacuum drying oven / oven air leakage?

Customer said, vacuum drying box vacuum pulled to the required degree of vacuum, after a while the degree of vacuum reduced, replaced the vacuum valve and vacuum tube, or this status quo, how is it?This indicates that the vacuum drying box is leaking.The most difficult to detect is the leakage of the tank, need to pour some water inside the box, th [more]

24

2016-06

Troubleshooting techniques for leakage and maintenance of vacuum dryin

Each drying box has its own specific scope of application, and each material can be found to meet the basic requirements of the drying device, but the most suitable only one. If the type is not properly selected, users should not only bear the unnecessary one-time high procurement costs, but also pay a heavy price throughout the use period, such as [more]

24

2016-06

What preparations should be made before drying oven / oven equipment i

What preparations should be made before drying oven / oven equipment is used? The new China instruments will explain to you one by one.1. The drying box is placed in the dry ground and worktable without any other fixtures.2. A knife or air switch shall be installed in the power supply line for the special purpose of the box, and a conductor twice a [more]

24

2016-06

Analysis of experimental equipment vacuum drying box principle

Vacuum drying chamber is designed for drying thermosensitive, decomposable and oxidizable substances. It can be filled with inert gases to the interior of the chamber. Especially for complex components, it can also be quickly dried. The product has the following characteristics:1. Storage, heating, testing and drying are carried out in an oxygen-fr [more]